| Series 2100 Meter Sockets were designed to reduce, simplify and help standardize pole mounted meter socket installations. The 2100's are offered in a variety of options to meet specific utility applications. The prewired units greatly reduce time spent installing pole mounted meter sockets and are provided complete with all wiring in place and hardware installed ready for mounting. |
 
|
| Capacity: |
| 100 amps, 600 volts |
| Terminals: |
| Set screw type up to #2 conductors |
| Hub Size: |
| 1" internal type |
| Enclosure: |
| Die cast aluminum |
| Breakouts: |
| Provided in back of each socket |
| Sealing Ring: |
| Snap action standard |
| Options: |
| Padlock type on B options |
| Cable Type: |
| See ordering information |
|
 |
 |
| To order a series 2101 or 2102 meter Socket, specify a code letter or number for each of the following: |
| 1. Basic Socket |
| Catalog No. |
Description |
| 2101 |
Basic meter socket with 2 - 1" hubs |
| 2102 |
Basic meter socket with 2 - 1" hubs and ground wire |
| 2. Mounting Options/Sealing Ring |
| Code |
Description |
| N |
Snap action seal ring. Standard socket only - wall mounted. |
| A |
Snap action seal ring. Standard pole/wall mounted bracket. |
| B |
Heavy duty pad-lock type sealing ring and heavy duty wrap-around pole mounted bracket. |
| C |
Lock sealing ring. (No mounting bracket) |
| D |
Pole/wall mounting bracket. Lock sealing ring. |
| G |
Heavy-duty wall bracket, Snap sealing ring. |
| 3. Number of Jaws |
| Code |
Description |
| F |
Four jaw |
| S |
Six jaw |
| T |
Six jaw with automatic shorting device |
| 4. Hug-Plug Option |
| Code |
Description |
| N |
None |
| A |
Male, plastic, plug top and female plastic plug with hole in bottom |
| B |
Cable connector on top, 1" plus with hole on bottom 3/8" - 1/2" |
| C |
1/2" - 5/8" |
| D |
5/8" - 3/4" |
| F |
Cable connector on top and bottom. 1/2" - 5/8" |
| G |
5/8" - 3/4" |
| H |
3/8" -1/2" |
|
|
| To order a series 2111 or 2115 meter Socket, specify a code letter or number for each of the following: |
| |
| 1. Basic Prewired Socket Options |
| Catalog No. |
Description |
| 2111 |
2102 meter socket prewired with polyethylene control cable and plastic plug-in bottom. See table # 4 |
| 2115 |
2102 meter socket prewired with polyethylene control cable and plastic plug-in bottom sealtite flexible armored cable jacket. See table # 4 |
| 2. Mounting Options/Sealing Ring |
| Code |
Description |
| N |
Snap action seal ring. Standard socket only |
| A |
Snap action seal ring. Standard pole/wall mounting bracket. |
| B |
Heavy duty pad-lock type sealing ring and heavy duty wrap-around pole mounted bracket. |
| C |
Lock sealing ring. (No mounting bracket) |
| D |
Pole/wall mounting bracket. Lock sealing ring. |
| G |
Heavy-duty snap action sealing ring and heavy-duty, wrap-around, pole mounted bracket. |
| 3. Number of Jaws |
| Code |
Description |
| FJ* |
Four jaws and 5/#12's - prewired |
| SJ* |
Six jaws and 7/#12's - prewired |
| TJ* |
Six jaws with automatic shorting switch |
| "M" wiring also available |
| 4. Top Cable Termination and Length |
| Code |
Description |
| C* |
"AN" type box connector |
| N* |
No cable termination |
| W* |
Weathered for drip loop |
| *Note: Specify cable length in feet. |
|
| |
