Smartlink 5000 - Cellular remote terminal unit for Series 1548 faulted circuit indicators

Smartlink 5000 communications for fault reporting

The Smartlinkä Series 5000 provides reliable and cost effective 2-way communications for automated fault reporting from Fisher Pierce Series 1548 radio FCIs. The unit provides flexible reporting of permanent and temporary (optional) fault conditions.

The Series 5000 uses technology from Telemetric to communicate over digital or analog cellular data networks. The secure web-based application displays the device data which can be queried or polled remotely. A variety of user specified fault alarms can be configured to notify a designated person of a reported event by email, pager, or text message.

The unit will immediately report alarm conditions including: permanent fault on any phase, phase status, fault cleared with status by phase, over- or under-voltage set points on control power phase, and low battery alarm.


	Reports fault alarms from up to (4) radio FCIs
	Uses local RF signal
	Radio FCIs can be up to 100' from the RTU
	Immediate reporting of alarm conditions
	Momentary fault data reporting
	Ensures optimal cellular coverage flexibility
	Web based application software or Telemetric's SCADA Xchangeä software allows user to query status points at any time
	Low battery alarms are sent automatically

Specifications
Electrical/Environment
Operating voltage: 95-135 Vac, 60Hz
Surge Withstand: ANSI/IEEE C37.90.1-2002, 4kV min. @ 1.2/50 μs surge
FNM style Slo-Blo fuse, barrel mounted
Operating temperature range: -40 deg C to +70 deg C
Fault Indicator Receiver
Operating Frequency: 312 MHz
Receiver Range: 100’ minimum typical
Receiver Sensitivity Adjustment: Selectable via local configuration or web application to max range of local RF radio (low gain, high gain)
Certification: Complies with FCC part 15 emissions
Cellular Radio Technology
Dual-band, dual-mode supporting GSM/GPRS 850/1900 MHz
Nationwide GPRS support via Cingular Wireless and affiliated roaming partners with a variety of application data plans.
Transmit power: 0.6 to 3W
External mounted antenna, flexible dual-band (850/1900) cellular, SMA(F) connector
Fault receiver antenna (312MHz RF system, BNC connector)
Battery Backup
Standard: Lead Acid, rechargeable 12V (3 to 5 years expected service life)
Carryover time: 4-hour typical, 3-hour minimum
Recharge time after 3-4 hour carryover: 6 hrs typ.
Accessibility: Front panel replaceable
Status message sent weekly or by request
Enclosure
Lexan enclosure for meter socket mounting
NEMA 3R Rating
Security latch for meter seal or 3/8” hasp padlock

	Digital Outputs to the 4400 control
1	Change Mode Switch Bank Reset Daily Close Count	Remote/Local Close/Trip Clear Neutral Current Lockout
	*Manual toggle switch on 4400 control disables all automatic and remote control functions
	Digital Inputs to the 4400 control
1	Close Inhibit Trip Inhibit Neutral Current Status VT Wire Neutral Current Protection Anti-Hunt Last Switch Opn. Command	Inhibit/Clear Inhibit/Clear Lockout/Clear Line-Neut/Line-Line Enabled/Disabled Enabled/Disabled Trip/Close
	Analog Inputs from the 4400 control
1	- Voltage, secondary (V) - Last Delta E (V) - Current, primary (A) - Power, 3PH (kW) - VAr, 3PH (kVAr) - Power Factor (through web access) - Neutral Current (A) - Temperature deg F - Total Close Count - Close Today Count - Capacitor Control Run time (hrs) - Maximum Close Count per Day Setpoint - Operation Mode - PCC Identification Number	- Neutral Current Sensor Type - Current Sensor Phase - Voltage Transformer Ratio - Phase Rotation - Current Direction (Forward/Reverse) - Current Transformer Ratio - Current Sensor Type - Total Angle Correction (deg) - Reverse Power Control Action - Season # - Primary Control Function - Close Setpoint - Trip Setpoint

Joslyn Hi-Voltage Royce Thompson Fisher Pierce