  |
   |
|
|
 |
 |
 |
 |
|
|
|
|
 |
| Overcurrent Trip, Automatic Time Reset Fault Indicators Series 1541/42/43 | |
| Fault Registration: | Red, high intensity light emitting diode (LED) with choice of hard wired of fiber optic cable remote mounting or audible intermittent beeper signal. |
| Trip Current: | Factory
preset to customer specifications. Range 50A and 100A to 1500A in 100A increments. |
| Trip Current Accuracy: | ±10% of trip rating (calibrated using 1" diameter cable for 400A trip or less; or 2.0" diameter cable for greater than 400A trip.) |
| Trip Response Speed: | Consult trip curves. Coordinated to properly applied link, expulsion, power and current limiting fuses. |
| Reset Time: | 4
hours, 2 hours, 1 hour. Manual trip/reset standard. |
| Overload Capacity : | Capable of withstanding 25,000A for 10 cycles. |
| Continuous Load Current: | Rated at 1000A (maximum) |
| Temperature
Range: |
-40°C to +85°C |
|
Submersibility: |
Tested to 30 feet. |
|
Operating Battery Life: |
800 hours
for LED indication 160 hours for audible indication Both with 10 year life at 20°C. |
| Battery: |
Long life lithium cell |
|
Cable Ranges: |
0.63 to 1.58"; 1.58 to 2.36"; 2.36 to 3.55" |
|
Remote Fiber Optic Options: |
Permanent or removable (standard 10 feet with a maximum of 30 feet) |
|
Home | About Us | Products | Library | Contact Us | Chinese Site Joslyn Hi-Voltage - 4000 E 116th Street, Cleveland, Ohio 44105 USA Email: T&B Contact InformationCopyright © 2001 Joslyn Hi-Voltage. All rights reserved. |
